Main Content

Infinite Hydraulic Resistance

(To be removed) Hydraulic element for setting initial pressure difference between two nodes

The Hydraulic library will be removed in a future release. Use the Isothermal Liquid library instead. (since R2020a)

For more information on updating your models, see Upgrading Hydraulic Models to Use Isothermal Liquid Blocks.

Library

Hydraulic Elements

  • Infinite Hydraulic Resistance block

Description

The Infinite Hydraulic Resistance block represents a break in a hydraulic network. There is no fluid flow through the break. However, the fluid properties, specified by the Custom Hydraulic Fluid block connected to the circuit, are the same on both sides of the break. Use this block to set the priority and initial target value to the difference in pressure between port A and port B.

The Variables tab lets you set the priority and initial target value for the Pressure difference variable prior to simulation. For more information, see Set Priority and Initial Target for Block Variables.

Ports

The block has two hydraulic conserving ports.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2014b

collapse all

R2023a: To be removed

The Hydraulic library will be removed in a future release. Use the Isothermal Liquid library instead. Blocks in the Isothermal Liquid library provide increased accuracy, usability, and numerical performance.

For more information on updating your models, see Upgrading Hydraulic Models to Use Isothermal Liquid Blocks.