Main Content

iv4Options

Option set for iv4

Description

Use iv4Options to create option sets when using the iv4 function.

Creation

Description

example

opt = iv4Options creates the default options set for iv4.

example

opt = iv4Options(Name,Value) creates an option set with the options specified by one or more Name,Value arguments.

Before R2021a, use commas to separate each name and value, and enclose Name in quotes. For example, opt = iv4Options('Display','on') creates an iv4Options object and specifies the Display as on.

Properties

expand all

Handling of initial conditions during estimation, specified as one of the following values:

  • 'zero' — The initial condition is set to zero.

  • 'estimate' — The initial condition is treated as an independent estimation parameter.

  • 'auto' — The software chooses the initial condition handling method based on the estimation data.

Error to be minimized in the loss function during estimation, specified as the comma-separated pair consisting of 'Focus' and one of the following values:

  • 'prediction' — The one-step ahead prediction error between measured and predicted outputs is minimized during estimation. As a result, the estimation focuses on producing a good predictor model.

  • 'simulation' — The simulation error between measured and simulated outputs is minimized during estimation. As a result, the estimation focuses on making a good fit for simulation of model response with the current inputs.

The Focus option can be interpreted as a weighting filter in the loss function. For more information, see Loss Function and Model Quality Metrics.

Weighting prefilter applied to the loss function to be minimized during estimation. To understand the effect of WeightingFilter on the loss function, see Loss Function and Model Quality Metrics.

Specify WeightingFilter as one of the following values:

  • [] — No weighting prefilter is used.

  • Passbands — Specify a row vector or matrix containing frequency values that define desired passbands. You select a frequency band where the fit between estimated model and estimation data is optimized. For example, [wl,wh] where wl and wh represent lower and upper limits of a passband. For a matrix with several rows defining frequency passbands, [w1l,w1h;w2l,w2h;w3l,w3h;...], the estimation algorithm uses the union of the frequency ranges to define the estimation passband.

    Passbands are expressed in rad/TimeUnit for time-domain data and in FrequencyUnit for frequency-domain data, where TimeUnit and FrequencyUnit are the time and frequency units of the estimation data.

  • SISO filter — Specify a single-input-single-output (SISO) linear filter in one of the following ways:

    • A SISO LTI model

    • {A,B,C,D} format, which specifies the state-space matrices of a filter with the same sample time as estimation data.

    • {numerator,denominator} format, which specifies the numerator and denominator of the filter as a transfer function with same sample time as estimation data.

      This option calculates the weighting function as a product of the filter and the input spectrum to estimate the transfer function.

  • Weighting vector — Applicable for frequency-domain data only. Specify a column vector of weights. This vector must have the same length as the frequency vector of the data set, Data.Frequency. Each input and output response in the data is multiplied by the corresponding weight at that frequency.

Control whether to enforce stability of estimated model, specified as the comma-separated pair consisting of 'EnforceStability' and either true or false.

Option to generate parameter covariance data, specified as true or false.

If EstimateCovariance is true, then use getcov to fetch the covariance matrix from the estimated model.

Option to display the estimation progress, specified as one of the following values:

  • 'on' — Information on model structure and estimation results are displayed in a progress-viewer window.

  • 'off' — No progress or results information is displayed.

Removal of offset from time-domain input data during estimation, specified as one of the following:

  • A column vector of positive integers of length Nu, where Nu is the number of inputs.

  • [] — Indicates no offset.

  • Nu-by-Ne matrix — For multi-experiment data, specify InputOffset as an Nu-by-Ne matrix. Nu is the number of inputs and Ne is the number of experiments.

Each entry specified by InputOffset is subtracted from the corresponding input data.

Removal of offset from time-domain output data during estimation, specified as one of the following:

  • A column vector of length Ny, where Ny is the number of outputs.

  • [] — Indicates no offset.

  • Ny-by-Ne matrix — For multi-experiment data, specify OutputOffset as a Ny-by-Ne matrix. Ny is the number of outputs, and Ne is the number of experiments.

Each entry specified by OutputOffset is subtracted from the corresponding output data.

Additional advanced options, specified as a structure with the following fields:

  • MaxSize — Specifies the maximum number of elements in a segment when input-output data is split into segments.

    MaxSize must be a positive integer.

    Default: 250000

  • StabilityThreshold — Specifies thresholds for stability tests.

    StabilityThreshold is a structure with the following fields:

    • s — Specifies the location of the right-most pole to test the stability of continuous-time models. A model is considered stable when its right-most pole is to the left of s.

      Default: 0

    • z — Specifies the maximum distance of all poles from the origin to test stability of discrete-time models. A model is considered stable if all poles are within the distance z from the origin.

      Default: 1+sqrt(eps)

Examples

collapse all

opt = iv4Options;

Create an options set for iv4 using the 'backcast' algorithm to initialize the state. Set Display to 'on'.

opt = iv4Options('InitialCondition','backcast','Display','on');

Alternatively, use dot notation to set the values of opt.

opt = iv4Options;
opt.InitialCondition = 'backcast';
opt.Display = 'on';

Version History

Introduced in R2012a

expand all